Vinten FH-155 Head with integrated StarTracker
Call for Price
70Kg(155lb) payload head, continously adjustable manual operation and robotic mode, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Fitted with internal StarTracker camera and CPU for realtime roaming positional updates. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
The Vinten FH-155 Robotic/Manual Head with Integrated StarTracker System is a fully functional robotic head that can be easily switched between robotic and manual modes. Suitable for studio or remote work, the head is nearly silent in either robotic or manual mode and supports up to 155 pounds. It features a built-in floor movement tracking system, the StarTracker system, which provides information on the head’s position in relation to the floor. It has a cradle to adjust the center of gravity and balance of your camera on the head for best results. The head features accurate and highly repeatable motion control of the camera as well as compatible Canon and Fujinon servo-controlled lenses.
When switched to manual mode, the head features continuously adjustable servo tilt and pan drag to maintain the smooth function when being operated by a human operator. This head includes a pan handle rosette adapter and two telescoping pan handles. The head can tilt a total of 100° (50° down and 50° up), and can pan 359°. The built-in 3-port Ethernet switch simplifies integration with robotic pedestals and IP prompting equipment. Mounting the head on a tripod or pedestal requires an optional mounting adapter.
- The optical StarTracker system provides information on the position of the head as it travels along the studio or location floor.
- Designed for use with larger camera, lens, and prompter packages.
- Combines sophisticated software and mechanical engineering to deliver accurate and smooth movement.
- Designed to be near silent when moving, the head is well suited for use in environments with ultra-critical noise limits.
- A manual mode of operation features continuously adjustable servo-controlled drag, offering smooth pan and tilt movement.
- The servo-controlled drag system is powerful enough to manage payloads up to 155 pounds. Switching between robotic and manual mode can be done either at the head or controller.
- A rosette adapter and two telescoping pan handles are included for use when the head is in manual mode.
Key Features
- Near-Silent Robotic or Manual Operation
- Supports up to 155 Pounds
- Floor Movement Tracking System
- Smooth Camera and Lens Motion Control
- Canon and Fujinon Servo Lens Control
- Accurate and Repeatable at All Speeds
- Servo Drag Adjustment in Manual Mode
- 2 x Pan Handles with Adapter Included
- ± 50° Tilt, 359° Pan
- Mounting Adapter Required
Package Includes
- Vinten FH-155 Robotic/Manual Head with Integrated StarTracker System
- Camera Cradle (Comprising Backplate and Mounting Plate)
- 3 x Center Screw
- Cable Management Bracket
- Power Cable (10′)
- CAT 5e Ethernet Cable (10′)
- Pan Handle Assembly
- 2 x Telescoping Pan Handle
- 5 x Cable Tie
- 3 x M4 Countersunk Screw
- 2 x 3/8″ BSW x 3/4″ Cap Head Screw
- 4 x 3/8″ Head Fixing Bolt
- Vinten Spanner (for Head Fixing Bolt)
- 5mm Allen Key
- 5/16″ Allen Key
- 5/64″ Allen Key
- Flat Blade Screwdriver
- Limited 1-Year Warranty
Specifications
| Payload | 155 lb / 70.31 kg |
| Pan & Tilt Range | Pan: 359° Tilt: ±50° |
| Drag Control | Continuous Drag Adjustment, Servo Controlled |
| Angular Speed | Velocity: 0.05 to 60°/s Acceleration Typical: 60°/s2 Acceleration Peak: 120°/s2 |
| Lens Control | Canon Lenses: Full-Servo Fujinon Lenses: Full-Servo |
| Genlock | Black Burst / Tri-Level |
| Connectors | Power: powerCON Ethernet: 3 x RJ45 Genlock: 1 x Micro BNC Aux Port: 26-pin LANC Port |
| Shot Recall Repeatability | ±60 Arcseconds (±0.016°) |
| System Resolution / Accuracy | 22-bit, >0.01˚ |
| Rated Load Inertia | 16.53 lb ft2 / 7.5 m2 kg |
| Motor Noise | 41dBA at Max Speed |
| Network | IP Ethernet |
| Power | Input: 100 to 240 VAC, 50/60 Hz Consumption: 175 W |
| Fuse Protection | 250 VAC, 3.15 A |
| Temperature Range | 41 to 104°F / 5 to 40°C |
| Dimensions | 19.29 x 17.17 x 9.25″ / 490 x 436 x 235 mm |
| Weight | 49.6 lb / 22.5 kg |
Be the first to review “Vinten FH-155 Head with integrated StarTracker”
You must be logged in to post a review.
Related products
Out of stock
€11.00 ex vat.
Camera Accs
€7.95 ex vat.
Camera Accs
€950.00 ex vat.
Out of stock
Camera Accs
€65.00 ex vat.
Out of stock
Camera Accs
€7.95 ex vat.
Camera Accs
€19.95 ex vat.
Camera Accs
€7.00 ex vat.
€9.95 ex vat.
Reviews
There are no reviews yet.