Vinten Head Vision 250 ball base
€8,900.00 ex vat.
Dual 100/150mm Ball base head with 1 telescopic pan bar, camera plate & bowl clamp knob.
Out of stock
The VISION 250 HD Fluid Head from Vinten is designed to support the latest portable digital camera combinations used in studio and field broadcast productions. With its unique twin balancing mechanism, the Vision 250 can be fully adjusted to perfectly balance any camera or lens combination—either weighing up to 72.8 lb—quickly and easily. The VISION incorporates a drag mechanism employing non-contacting thin film technology which ensures consistent drag and constant performance over a temperature range from -40 to 140°F. TF drag allows for fine adjustment of drag levels, as well as whip pan movement without any manual reduction of the drag.
In addition, the Vision 250 has the benefit of digital counterbalance readout, backlit drag controls, and an illuminated leveling bubble to give the camera operator the quickest and most simple setup, even in low-light situations.
Perfect Balance
The Vision 250 pan/tilt head achieves the perfect counterbalance by means of an innovative and patented infinitely variable spring mechanism. This allows the head to tilt through the full range of ±90° in perfect balance, eliminating a considerable amount of physical effort required by the operator to control the tilting action. Since the camera is perfectly balanced, it can be left at any angle, totally hands-free, without having to lock the tilt brake. The variable counterbalance mechanism allows it to be used with a variety of lenses, batteries, viewfinders and on-camera lights. For even faster setup, the Vision 250 offers a digital counterbalance readout with repeatable balance setting. The display is activated by a simple press of a button and remains visible for 15 seconds.
TF (Thin Film) Drag Control
The Vision 250 uses the Vinten TF (Thin Film) damping system to provide consistent drag and constant performance in demanding conditions from -40 to 140°F. The TF system offers total control for precise movement and excellent camera control during the critical slow startup of your shot, providing seamless transition into whip pan and instant recovery to the original drag setting at the finish of the movement.
Calibrated with variable adjustment and a single-turn rotation from fully on to off, the drag knobs are backlit and adjusted accordingly (depending on the lighting conditions) by a light sensor built into the digital readout.
Interlock Device
The interlock device is positive-latching and thus overrides the tilt brake to ensure that any load doesn’t move in its fixed position. The tilt brake therefore doesn’t wear out prematurely.
Quick Setup
Unique design features allow fast setup, a must if you are continuously on the move. The leveling bowl has a double-threaded screw shank which allows the bowl lock to be tightened and released quickly. This is handy when you are constantly adjusting the bowl to level the camera (especially on uneven terrain).
Adjustable camera mounting plate with unique rubber grip strips holds the camera rock steady.
Up to 72.8 lb load capacity.
Key Features
- Twin Mechanism Balances up to 72.8 lb
- Drag Mechanism for Fine Adjustment
- Interlock Device Protects Tilt Break
Package Includes
- Vinten VISION 250 HD Fluid Head (100/150mm Ball Base, Black)
- Limited 1-Year Warranty
Specifications
Camera Plate
| Camera Plate Features | Sliding Balance Plate, Quick Release |
| Camera Plate Type | Vinten 33364-900SP |
| Camera Mounting Screw | 2 x 3/8″-16 Male |
| Balance Plate Sliding Range | 4″ / 101.6 mm |
Tripod Platform
| Base Mount | 150 mm Half Ball 100 mm Half Ball |
Pan & Tilt
| Drag Control | Tilt: Continuous Plus 0 |
| Vertical Tilt | +90° to -90° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
Physical
| Load Capacity | 72.8 lb / 33 kg |
| Counter Balance | Continuous (22 to 72.8 lb / 9.98 to 33.02 kg) |
| Center of Gravity | 5″ / 12.7 cm |
| Bubble Level | 1 x Illuminated |
| Operating Temperature | -40 to 140°F / -40 to 60°C |
| Weight | 13.5 lb / 6.1 kg |
Be the first to review “Vinten Head Vision 250 ball base”
You must be logged in to post a review.
Related products
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
€745.00 ex vat.
Out of stock
Camera Accs
€449.00 ex vat.
Out of stock
Camera Accs
€1,700.73 ex vat.
Out of stock
Camera Accs
€1,218.78 ex vat.
Out of stock
Camera Accs
Call for Price
Reviews
There are no reviews yet.