Sachtler PTZ HD Pedestal System
€3,940.00 ex vat.
PTZ & Prompter plate (V4166-1002) + Pedestal adaptor (08349) + CI Pedestal (4191)
Out of stock
Mount your PTZ camera weighing up to 44 lb on a sturdy pedestal for fast position changes as well as smooth shot moves with the Sachtler PTZ HD Pedestal System. This bundle includes an adjustable height pneumatic pedestal that supports up to 44 lb, a pedestal adapter, and a PTZ camera plate. The pedestal combines a pneumatic column with a tripod and tripod dolly, creating a single unit for studio and exterior use. The large wheels allow you to glide for smooth shots while shooting or fast rolling to a new camera position. The pedestal has a pneumatic height adjustment of 15.4″ with total height adjustments between 2.23 and 5.15′.
Sachtler 4191 Pedestal C I System (Flat Base) with Dolly 75
The Sachtler Pedestal C I System might look like a traditional tripod upon initial inspection, but this is far from the fact. With a patented pneumatic column designed to be adjusted to the exact weight of a given camera, lens and prompter configuration, your camera will literally be floating on air. Combined with the Dolly 75, this system is as light as a tripod while being as stable and versatile as a pedestal.
Payload Capacity
The Pedestal C I can carry a payload of up to 44 lb (20 kg), over twice its own weight
Pneumatic Column
The pedestal is anchored by a pneumatic column. The system works on the principle of compressed air, which acts as a counterweight and shock absorber, allowing seamless adjustments during a shot.
OConnor 08349 Sachtler/Vinten Base
The 08349 Studio Pedestal/Tripod Adapter from OConnor enables you to mount a Mitchell or 150mm base head on a Vinten, Sachtler, or another broadcast-style support. Use this versatile adapter to mount your head onto a studio or ENG-style tripod, pedestal, or jib.
This plate incorporates studio 3-bolt, 4-bolt, and Vinten Quickfix mounting holes. The same screws that hold the original base to your head can be used to attach the adapter.
Compatible Head Bases
- Mitchell
- 150mm base
Mounting Holes
- 3-bolt and 4-bolt studio
- Vinten Quickfix
Vinten PTZ and Prompter Plate
The Sachtler and Vinten PTZ accessory plates are designed for simple mounting of a PTZ camera to the widest range of tripods and pedestals. Simply select the correct plate and interface for your chosen camera support Any PTZ camera where the tapped mounting holes on the underside are in line with the lens centre of the camera. To fit to the bottom of a prompter bracket when the PTZ is mounted to a prompter.
Features
- CI Pedestal
- Pedestal Adapter
- PTZ and Prompter Plate
In the Box
-
- Limited 1-Year Warranty, Extendable to 2-Years with Product Registration
-
- Limited 1-Year Warranty
Specs
Sachtler 4191 Pedestal C I System (Flat Base) With Dolly 75 Specs
| General | |
| Load Capacity | 44.1 lb (20 kg) |
| Trim Ring | No |
| Bowl Diameter/Thread | 100 mm |
| Steering Ring Diameter | 5.6″ (142.2 mm) |
| Folded/Transport Length | Not Specified By Manufacturer |
| Minimum Height | 26.8″ (68 cm) |
| Maximum Height | 61.8″ (157 cm) |
| Weight | 20.3 lb (9.2 kg) |
| Post | |
| Stages | 1 |
| On-Shot Stroke | 15.4″ (39 cm) |
Dolly
| Doorway Tracking Width | 32″ (81 cm) |
| Transit Doorway Width | No |
| Narrow Doorway Width | Not Applicable |
| Wheel Diameter | 4″ (10.1 cm) |
Be the first to review “Sachtler PTZ HD Pedestal System”
You must be logged in to post a review.
Related products
Out of stock
Camera Accs
€1,235.00 ex vat.
Out of stock
Camera Accs
€850.00 ex vat.
Out of stock
Camera Accs
€745.00 ex vat.
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
€449.00 ex vat.
Out of stock
Camera Accs
Call for Price
Out of stock
Camera Accs
Call for Price
Reviews
There are no reviews yet.